Procedure 5-9: How To Clear Errors And Re-Initialize The System - AGFA Jeti Tauro H3300LED Series Operator's Manual

- Step 4: Once the media is clear from the belt, close the operator door and click on the Finish button.
This homes the shuttle.
- Step 5: Initialize the Jeti Tauro H3300LED using the Re-init command as instructed in Procedure:
"How to Clear Errors and Re-initialize the
Procedure: How to Clear Errors and Re-initialize the System
- Step 1: Initialize the Jeti Tauro H3300LED with the Re-init button in the bottom right of the Engine
Message Overview window
- Step 2 After the initialization sequence, all modules should be ready. However, if a module fails to
initialize, you have the option to use the All-Off button
ules Off before attempting a new initialization.
Agfa Graphics
(outlined in red in Fig. 5-45)
System".
(outlined in red in Fig.5-46)
Revision 1.0
Jeti Tauro H3300LED Operator Manual
Fig.5-45: Crash Recovery Finish Button
.
(outlined in white in Fig.5-46)
and turn all mod-
Fig.5-46: Initialization Sequence
Chapter 5
64