Purge And Clean; Procedure 4-2: How To Perform A Purge And Clean - AGFA Jeti Tauro H3300LED Series Operator's Manual

Purge and Clean

After an inactive period of more than 2 hours, you have to perform a purge and cleaning of the
printheads.
Procedure: How to Perform a Purge and Clean
- Step 1: Select the shuttle status screen and hit the "Purge Colorbar(s)" button.
2
- Step 2: "Purge Colorbars" pop up window select "Purge" use always long purge time.
At the start of the purge cycle the automatic drip tray is lowered.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
1
Revision 1.0
3
Fig.4-8: Shuttle Status Screen
Sub tank is purging
Sub tank is ready
Fig.4-9: Purge Colorbars Pop up
Chapter 4
29