References - AGFA Jeti Tauro H3300LED Series Operator's Manual

Overview
This chapter contains the following topics:
• Introduction on Page 8-1
• Jeti Tauro Incidents List on Page 8-1
• Acronyms on Page 8-1
• Terminology on Page 8-2
Introduction
This chapter identifies some references and acronyms used on the Jeti Tauro H3300 LED printer in a
production environment.
Jeti Tauro Incidents List
The GUI of the Jeti Tauro H3300 LED occasionally refers to specific actions based on an 'Incident List'.
Each so-called incident may contain one of the following: information, warnings, errors or service re-
quests.
The GUI will show the item number and a cryptic description of the incident. Please refer to this
embedded PDF document for further details: (see attachment in PDF)
Acronyms
BAS
CIS
CS
ESD
GUI
H3300
IPA
ISS
LED
MAS
NPI
RFID
RTR
VAS
Z move
Basic Air System
Color bar Ink Supply
Collision Sensor
Electrostatic Discharge
Graphic User Interface
Hybrid 3300 mm wide
IsoPropyl Alcohol
Ink Supply System
Light Emitting Diode
Maintenance Air Supply
Native dot Per Inch
Radio Frequency Identification
Roll To Roll
Vacuum Air Supply
Carriage up down motion
Revision 1.0
Chapter 8

References

95