Manual Continuous Mode
Select the Continuous Print mode from the GUI
• Place the pinch roll in slot 1, the set bar in slot 2, the roll bar in slot 3 and the flattening roll in slot
4
(see Fig.5-9 and outlined in green in Fig.5-8)
See
"Printing a job in Manual Continuous Mode"
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
(outlined in red in Fig.5-8)
.
for more details.
Revision 1.0
.
Fig.5-8: GUI - Continuous Print Mode
4
Flattening Roll
3
Roll Bar
2
Set Bar
1
Pinch Roll
Fig.5-9: Continuous Print Mode Configuration
Chapter 5
45