Machine Operation; Introduction; Input And Output Modes On The Tauro - AGFA Jeti Tauro H3300LED Series Operator's Manual

Introduction

This chapter identifies the procedures necessary to operate the Jeti Tauro H3300LED printer in a
production environment.
This chapter contains the following topics:
• Introduction
• Input and Output Modes
• Printing a job in Manual Mode on Jeti Tauro H3300LED
• Printing a job in Continuous Mode on Jeti Tauro H330
• Media Feed Support (Optional)
• Adjusting Parameters in the Queue During Printing
• Editing a Job
• Refilling the Primary Ink Tanks
• Switching the Engine Off for a Short Period
• Clearing Errors
• Opening the Interlocked Operator Door
• Checking Print Quality

Input and Output Modes on the Tauro

The following Fig.s detail the different input and output operating modes on the Jeti Tauro H3300LED
printer.
Fig.5-1 shows the configuration with a small media table on the input side and a small media table on
the output side. This configuration can be used in manual mode or in continuous mode.
Revision 1.0
Chapter 5

Machine Operation

Fig.5-1: Small Media Tables
42