Title And Navigation Top Bar; System Mode; Status Bottom Bar - AGFA Jeti Tauro H3300LED Series Operator's Manual

Title and Navigation Top Bar

The navigation top bar contains the following information:
• Version information
• User profile selection tool (password protected)
• Tabs for switching between job and system mode
• Application screen control allows minimizing or closing the GUI application
.
14)
Environment to Calibrate the Machine
Important: Engine calibration mode is for the key operator level and therefore requires specific
training.

Status Bottom Bar

The bottom bar is common for both job list and system mode.
1 2 3 4
01. Time Display Indicator
02. Connection to Asanti Indicator - gray indicates off-line and green indicates on-line
03. Engine Ready Indicator - displays a status bar under the printer icon when printing is in progress
04. Print Mode Indicator - Manual mode displays two side by side sheets and Roll to Roll mode displays
a roll
05. Link to the system tab view of the active 'warnings'
06. Link to the system tab view of the active 'service requests'
07. Status drip tray
08. LED Protection Unit indicator - displays in red when not printing and displays in green when printing
09. Vacuum indicator - displays in red when vacuum is off and displays in green when vacuum is on.
Click to start or stop the vacuum
10. Belt Status Indicator - displays white when belt is stopped and gray when the belt is moving. Click
to start or stop the belt
11. UV led1 is on and UV led2 is on
12. Slot Control Indicators - click to move up or down
13. Level status indication of the main ink tanks
14. Level status indication of the ink waste container
Agfa Graphics
(outlined in red in Fig.6-14)
5 6 7 8 9 10 11
Revision 1.0
Jeti Tauro H3300LED Operator Manual
(outlined in green in Fig.6-14)
(outlined in blue in Fig.6-14)
12
(outlined in yellow in Fig.6-
Fig.6-14 Title and Navigation Top Bar
13 14
Fig.6-15: Status Bottom Bar
Chapter 6
80