AGFA Jeti Tauro H3300LED Series Operator's Manual page 47

Jeti Tauro H3300LED Operator Manual
- Step 02: Check color print heads nozzles (see Fig.4-29). under joblist, open filter and enable Show
technical images
Fig.4-29: Nozzle Check Window
Note: The use of the Agfa certified Tauro calibration media is not mandatory for this test. This test
can be printed on any media larger than the image size 1020 X 720 mm. The standard media thick-
ness is set to 150 µ by default. Thickness can still be changed in the ready list if you use a thicker
media. As soon the test file is in the queue list, the value cannot be changed.
- Perform this task each day after the daily print head cleaning.
Fig.4-30: Nozzle Check Colors Test Pattern
Note: When all the nozzles are jetting correctly, each color patch is nice and flat. Missing or mis-
aligned nozzles in the printed patterns indicate either of these errors:
• Blank pattern indicates a blocked nozzle.
• Misaligned lines in a pattern indicate nozzles firing incorrectly ("side shooter").
Agfa Graphics Revision 1.0
Chapter 3
39