Manual Mode
Select the Manual mode from the GUI
• Place the roll bar in slot 3 and the set bar in slot 4. In Manual mode, there is always a pinch roll in
slot
1, which is not in use in this mode, and slot 2 is free
See "Printing a job in Manual Mode on Jeti Tauro H3300LED"for more details.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
.
(outlined in red in Fig.5-6)
Revision 1.0
(see detail in Fig.5-7 and outlined in green in Fig.5-6)
4
Set Bar
3
Roll Bar
2
Not in use
1
Pinch Roll
Fig.5-7: Manual Mode Configuration
Fig.5-6: GUI - Manual Mode
.
Chapter 5
44