Rules For Safe Operation; Overview Of The Safety Mechanisms - AGFA Jeti Tauro H3300LED Series Operator's Manual

Rules for Safe Operation

• Training requirement
Only properly trained personnel can perform tasks on the Jeti Tauro H3300LED. The number of tasks
a person is allowed to perform on the printer, is directly linked to the level of training that person
has had. We define three levels:
• Operators
• Service
• Agfa service
Operators can operate the printer and perform the maintenance tasks listed in this manual. All other
maintenance and service actions are reserved (password protected) for Service and/or Agfa service.
Failure to comply with these measures of safe operation and maintenance may result in personal injury
or machine damage.
• Always follow the recommended start up procedure
• Keep the work area clean
• Moving parts hazards: Remove any chains, jewelry, ties or similar garments when operating or work-
ing on the machine.
• Handle media with caution
• Wear safety shoes
• Do not cut on the transport belt
• Turn power off before servicing
• Beware of warm surfaces
• Keep the cover closed at all times during operation
• Do not operate the Jeti Tauro H3300LED while under the influence of drugs, alcohol or medication
that could impair your judgment and vigilance.
• Do not abuse the power cable
• Save these instructions. Refer to them frequently and use them to instruct others.

Overview of the Safety Mechanisms

The Jeti Tauro H3300LED has safety mechanisms and features to prevent personal injury during ma-
chine operation. The operator should be familiar with all safety devices before operating the machine.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
Revision 1.0
Chapter 1
03