Shuttle Components; Carriage - AGFA Jeti Tauro H3300LED Series Operator's Manual

Shuttle Components

The shuttle is made up of the following components:

• Carriage

• Ink System
• Color Ink Refill Cabinet
• Specialty Ink Refill Cabinet
• Operator Maintenance Cabinet
• Led Protection Unit
Carriage
The carriage is the part of the shuttle that can move up and down by the means of two stepper motors
in order to accommodate different media thicknesses, up to 50 mm. The carriage contains:
• Eight or ten color bars
• Two UV curing modules
• Two LED Protection Units
• Two collision sensors (CS)
• One anti-static ionizer (AS)
Agfa Graphics
(outlined in red in Fig.3-4)
(outlined in green in Fig.3-4)
(outlined in green in Fig.3-5)
(outlined in blue in Fig.3-5)
(outlined in red in Fig.3-5)
Revision 1.0
Jeti Tauro H3300LED Operator Manual
depending on options.
.
.
.
.
Fig.3-4: Carriage Front
Chapter 3
18