AGFA Jeti Tauro H3300LED Series Operator's Manual page 99

• Masking control (outlined in red in Fig.6-33). The mask is a software-controlled randomization of
the print head nozzle usage. You can select Flat mask or Gradient mask method and percentage of
masking. See for more info document Describing Gradient
• Layer selection (outlined in green in Fig.6-33). The layer selection check boxes allows the operator
to print layers separately and change the order of the layers of a PrintTask. Only supported combina-
tions are allowed.
Caution: Changing the layer order UP/DOWN may result in unverified print results!
• Number of passes (outlined in blue in Fig.6-33). The quality level is defined according to the number
of passes and applied resolution see detailed in Table 6-1:
Table 6-1: Quality Level
Number of
Passes
2
2
4
Agfa Graphics
Name
Express
Express plus
Production
Revision 1.0
Jeti Tauro H3300LED Operator Manual
Slow Scan
1200
1200
1200
Fig.6-33 Print Tasks Pane - Quality Tab
Fast Scan
635
1016
635
Chapter 6
91