Page 3
Be sure to follow all instructions and warnings in this manual when using Do NOT look directly into the UV light when printing, and don’t expose your skin directly to the UV light. If you need to look at the direction of the light, wear protective glasses or look through the front cover glas.
Page 32
Important When printing on heat sensitive media, always make sure the right UV lamp is going passed the media, on the point of returning. (otherwise there will be more heat at the left side of the media, which can cause media cockling or produce a yellowish shine on some media) This can be arranged on the Rip level by entering a blanco space at the right of the pictures.
Page 33
Remark: The engine has also a parameter ‘Mark Center Offset’ for this which is default set on value ‘5000’ means 2.5 cm besides the image edge. This value can be changed by the technician, but if this value is made higher, the bidirectional alignment value has to be changed accordingly, and you will be restricted in total image width if you want to print at another time at full width of the engine onto your media (the extra displacement counts off of your...
Need help?
Do you have a question about the 1 and is the answer not in the manual?
Questions and answers