Caution: Do not use the cover or the bar to open the operator door.
Checking Print Quality
Check the overall quality by printing one of the "Agfa Sign Off" built in patterns to confirm the Jeti
Tauro H3300LED print quality.
Important: The use of the Agfa certified Tauro calibration media is mandatory for this test. Use
the media delivered with the machine to check the overall Jeti Tauro H3300 LED print quality.
Print one of the following test patterns according to the quality that needs checking:
• Agfa_SignOff_Express
• Agfa_SignOff_Production
• Agfa_SignOff_Standard
• Agfa_SignOff_HighDef
• Agfa_SignOff_HighQ
As reference you can compare the print quality of these prints to the sign off images that where printed
at the time of sign off (end of the installation).
Printing a Test Pattern for Expert Analysis
Print the built in "TauroDNA" test pattern and send it to an expert for analysis.
Checking the "TauroDNA" test pattern allows an expert to detect any Jeti Tauro H3300LED issue or
to confirm that the engine is within specification.
The use of the Agfa certified Tauro calibration media is mandatory for this test. Use the media
delivered with the machine to check the overall Jeti Tauro H3300LED print quality.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
Revision 1.0
Fig.5-49: close up doors handles
Fig.5-50: Door Opening not Allowed
Chapter 5
67