Health & Safety; Safety Labels On The Jeti Tauro H3300Led - AGFA Jeti Tauro H3300LED Series Operator's Manual

This section contains information related to the safe operation of the Jeti Tauro H3300LED and to the safe-
ty of the user and the persons around the equipment. Anybody who uses the printer must read this chapter
carefully before starting the machine. The safety instructions given in this chapter must be strictly observed
together with the safety rules which are applicable in the company where the machine is used.
Failure to comply with the information contained in this section could result in injury, loss, or machine dam-
age that is not covered by any warranty nor reparations made. The operator is solely responsible to adhere to
the local regulations and laws of safe machine operation.

Safety Labels on the Jeti Tauro H3300LED

The engine features safety symbols and declarations of safe operation for the operator and surrounding
personnel to obey while the Jeti Tauro H3300LED in operation. Make sure you know the location and
fully understand what these safety symbols mean and how they help you to interact safely with the
machine and its surrounding environment.
Electric shock hazard - This label is on the electronic cabinet doors. Contact
may cause electric shock and burn. Switch off and disconnect electric sup-
ply before servicing. The service engineer and the key operator are the only
persons entitled to open the electronic cabinet doors.
Burn Hazard - Do not touch. Switch off power and allow cooling before ser-
vicing.
UV Protection - This symbol represents potential UV exposure hazards. Wear
UV shielding glasses. Continued exposure may burn skin. Were protective
clothing. Avoid looking directly into the UV light sources, even when wearing
UV glasses.
Pinch Hazard - This symbol represents pinch hazards near rolling assemblies
that could catch an extremity or pull in loose clothing. Be aware of these
roller assemblies, especially when the engine is in RTR mode. Failure to be
cautious of this symbol could result in serious injury to yourself or others.
Punch Hazard - Machine parts with this label could trap and subsequently
shear an extremity of an operator during machine operation. The operator
should be cautious and make clear to bystanders that the danger present
could result in bodily injury.
Crush hazard from right - This symbol indicates crush hazard present during
machine operation that could trap and subsequently shear an extremity of an
operator. The operator should be cautious and make clear to bystanders that
this danger could result in serious injury.
Crush hazard from left - This symbol indicates crush hazard present during
machine operation that could trap and subsequently shear an extremity of an
operator. The operator should be cautious and make clear to bystanders that
this danger could result in serious injury
Revision 1.0
Chapter 1
Health & Safety
01