AGFA Jeti Tauro H3300LED Series Operator's Manual page 65

- Step 6 If all conditions are met, the LED on the selected ISS will start blinking. This is also
represented in the GUI.
Note: If the LED on the ISS does not start blinking, check the error messages on the GUI screen.
Important: Once accepted, promptly continue the refill (within 30 minutes). The same tag
cannot be accepted again.
- Step 7 Undo the ink container cap.
Important: Do not break the seal under the cap.
Note: Each ISS features a blade designed to break the ink container seal in a safe way. This prevents
the risk of having ink in contact with the user's skin.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
Revision 1.0
Fig.5-35: LED on the Selected ISS
Fig.5-36: Container Cap
Fig.5-37: ISS Blade
Chapter 5
57