Automotive-Style Throttle; Key Switch; Lower Mow/Raise Control Lever - Toro Reelmaster 5610-D Operator's Manual

Automotive-Style Throttle

Note:
This machine does not have a lever or switch to control the engine speed.
When the PTO is engaged to start spinning the cutting units, the machine automatically
changes the engine speed to high idle and stays there until the cutting units are disengaged.
When the PTO is not engaged, the throttle on the machine depends on the position of the
traction pedal, just like the throttle on a car.

Key Switch

Lower Mow/Raise Control Lever

Product Overview: Controls
G453721
G453725
Page 4–2
Off
On/preheat
Start
Lower the cutting units—Engage
the PTO first for cutting units to spin
(Mow mode).
Raise the cutting units—Disengage
the PTO first for cutting units to stop
spinning (Transport mode).
Note:
To partially raise the cutting
units to the turnaround position, briefly
pull the lever backward.
3464-486 A