Thermo Scientific thermoscientific Vanquish UHPLC System Operating Manual page 75

5.5.5.4 Installing the Detector Waste Line
Parts required
Follow these steps
UHPLC System
Operating Manual
• Detector waste line
TIP The detector waste line connects the flow cell outlet through the
detector waste outlet to the waste.
• For instructions on how to connect the waste line through the
detector waste outlet to the waste, follow the steps below.
• For instructions on how to connect the waste line from the flow cell
outlet, refer to the Operating Manual for your Vanquish detector.
• Suitable waste container
1. Locate the outlet for the detector waste line in the system base (see
figure below).
2. Route the waste line through the detector waste outlet.
Figure 30: Routing the waste line through the outlet
5 • Installation
Page 75