7
•
Maintenance and Service
Preparations
Follow these steps
Page 108
1. Turn off the power to the system and disconnect the power cord
from the power source.
1. Wipe the surfaces clean with a clean, dry, soft, lint-free cloth or
wipe. If necessary, slightly dampen the cloth or wipe with a solution
of lukewarm water and a suitable cleaning detergent.
2. Allow the cleaning detergent to react as recommended by the
manufacturer.
3. Wipe the cleaned surfaces with purified water to ensure that all
cleaning detergent residues have been removed.
4. Wipe the surfaces dry using a soft, lint-free cloth or wipe.
UHPLC System
Operating Manual