Thermo Scientific thermoscientific Vanquish UHPLC System Operating Manual page 63

5.4.5.2 Locking the System Base
UHPLC System
Operating Manual
When the system base is in movable mode and one column
compartment is installed, locking tools are already inserted into the
system base. The following instructions and images assume that the
column compartment is installed on the right side of the system.
1. Lock the system base by turning the locking tools as shown below.
Figure 21: Locking the system base
2. Remove the locking tools and store them in a safe place, for
example, in the system base drawer.
3. Have the column compartment(s) and charger re-installed by a
Thermo Fisher Scientific service engineer.
5 • Installation
Page 63