5
•
Installation
Page 62
4. Insert one locking tool into the lock port on the other side of the
system base.
Figure 19: Inserting locking tools into the system base (top view)
5. Unlock the system base by turning the locking tools as shown below.
In the unlocked position, the locking tools cannot be removed from
the system base.
Figure 20: Unlocking the system base
6. Move the system to the final position.
7. Lock the system base according to
(} page 63).
8. Have the additional column compartments and the Charger
mounted by a Thermo Fisher Scientific service engineer.
Locking the System Base
UHPLC System
Operating Manual