Crestron iLux CLS-C6 Series Operation Manual page 84

Crestron CLS-C6/C6M & CLSI-C6/C6M
Operations Guide – DOC. 6347E
Function name External Function (1-32)
Behavior Activates the corresponding "press" digital signal (press1 – press32 on
the External Functions slot) on the Cresnet system connected to the
CONTROL SYSTEM port. Signal remains high for as long as the button
is pressed.
LED On when the corresponding "fb" digital signal (fb1 – fb32 on the External
Functions slot) from the control system is high.
Applies To Shifted Rocker, Remote Button
Rocker Left, right, and both all do the same thing
Behavior
Notes Note that these should only be assigned to a CLS-C6 unit that is directly
connected to a Cresnet control system, or to keypads connected to that
unit's local devices network.
Function name Dual External Function (1/2 ...31/32)
Behavior Activates the corresponding "press" digital signal (press1 – press32 on
the External Functions slot) on the Cresnet system connected to the
CONTROL SYSTEM port. Signal remains high for as long as the button
is pressed.
The left button corresponds to the lower number. The right button
corresponds to the higher number.
LED On if feedback for either join number is high, off if feedback for both join
numbers is low.
Applies To Shifted Rocker
Rocker See "behavior" above
Behavior
Notes Note that these should only be assigned to CLS-C6 unit that is directly
connected to Cresnet control system. If assigned to unit that is
connected to the local devices network of another CLS-C6 unit, they do
not function.
Function name Shift
Behavior If Shift function is assigned to the up/down button in iLux Designer,
pressing this button alternates between lower and upper functions for
the six front panel function buttons
LED N/A
Applies To up/down
Rocker Top, bottom, and both all do the same thing
Behavior
Notes N/A
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 80
iLux Integrated Lighting System