Scene Commands - Crestron iLux CLS-C6 Series Operation Manual

Crestron CLS-C6/C6M & CLSI-C6/C6M
Scene Operating Commands
Operations Guide – DOC. 6347E
Reply packet
[ILUX] SZ [X] NAME [LABEL]
LABEL = Shade zone name
[ILUX] SZ ALL NAME [LABEL1], [...], [LABEL6]
LABELx = Shade group names separated by comma
Shade Type Query Command
The following command is used to query shade type. Command is not supported for
slave CLS-C6 devices.
Syntax: M SZ [X|ALL] TYPE ?
X = 1...6 Shade group
Reply packet
M SZ [X|ALL] TYPE [CODE1] [...] [CODE6]
CODEx = Shade types codes for shade group 1 - 6
Shade Type Codes
CODE
20 Somfy shade controller
21 SDC 4 relay shade controller
22 SDC DC shade controller

Scene Commands

Scene Recall
The following command is used to recall scene:
Syntax: [ILUX] SC [XX] RECALL
Recall Scene Commands
SCENE NUMBER (XX)
ON
OFF
1 - 15
Scene Raise, Lower and Stop Command
The following command is used to raise, lower or stop the scene light zone levels
which can use a scene fade time:
Syntax: [ILUX] SC [XX]
XX = OFF, ON, 1 - 15 Scenes
UP = Raise, DN = Lower, STOP = Stop scene raise/lower
Scene Toggle Command
The following command is used to toggle scene lights. Command is not support for
OFF scene:
Syntax: M SC [XX] [TOG]
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 66
iLux Integrated Lighting System
SHADE TYPES
DESCRIPTION
On Scene
Off Scene
Scene 1 - 15
[UP|DN|STOP]