Room Combining Commands; Override Commands - Crestron iLux CLS-C6 Series Operation Manual

Crestron CLS-C6/C6M & CLSI-C6/C6M
Override Mode
Operations Guide – DOC. 6347E

Room combining commands

Combine Rooms
This command is used to combine room controllers. This command is not supported
for slave CLS-C6 devices.
Syntax: M COMBINE [ILUX1] [ILUX2]
ILUXx = M for master, S1 - S8 for slaves
Un-Combine Rooms
This command is used to un-combine room controllers. This command is not
supported for slave CLS-C6 devices.
Syntax: M UNCOMBINE [ILUX1] [ILUX2]
ILUXx = M for master, S1 - S8 for slaves
Query Combine Status
This command is used to query room combine status. This command is not
supported for slave CLS-C6 devices.
Syntax: M COMBINE [ILUX1] [ILUX2]?
Reply packet
M COMBINE [STATUS]
[STATUS] = YES/NO

Override Commands

Override On Command
The following command is used to turn on override:
Syntax: [ILUX] OV ON
Override Off Command
The following command is used to turn off override:
Syntax: [ILUX] OV OFF
Override Status Command
The following command reads the override status.
Syntax: [ILUX] OV ?
Reply packet
[ILUX] [OV] [STATE]
STATE = ON/OFF Override On/Override Off
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 69
iLux Integrated Lighting System