Crestron iLux CLS-C6 Series Operation Manual page 61

Crestron CLS-C6/C6M & CLSI-C6/C6M
VERSION
Description:
Use this command to display the firmware version number. For example, this command would produce
information similar to the following:
Help Menu(s): Common
Syntax: VERSION
Parameters: None
WHITELEDLEVEL
Description: Use this command to display or set white LEDs brightness level. Refer to "LED Brightness" on page 26
for details.
Help Menu(s): Device
Syntax:
WHITELEDLEVEL <nnn>
WHITELEDLEVEL
Parameters: <0..100> to set brightness level
none to display current brightness level
WHITELEDGLOWLEVEL
Description: Use this command to display or set white LEDs glow brightness level. Refer to "Glow Mode
Brightness" on page 26 for details.
Help Menu(s): Device
Syntax: WHITELEDGLOWLEVEL <nnn>
WHITELEDGLOWLEVEL
Parameters: <0 100> to set glow level
none to display current glow level
This function is typically done using Crestron Toolbox or iLux Designer menu commands.
*
Operations Guide – DOC. 6347E
CLS-C6M Lighting Controller with Motion [v1.00.04,
#FFFD6899]
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 57
iLux Integrated Lighting System