Crestron iLux CLS-C6 Series Operation Manual page 72

Crestron CLS-C6/C6M & CLSI-C6/C6M
Operations Guide – DOC. 6347E
Scene Light Add/Remove Mask Command
This command is used to remove or add light zones to scenes. This command is not
supported for slave CLS-C6 devices.
Syntax: M SC [XX] LZMSK [VALUE]
XX= OFF, ON, 1 - 15 (scene)
VALUE=0...63 (1=Add, 0=Remove)
(bit0...bit5=Light zone 1...Light Zone6)
Scene Light Mask Status Command
This command is used to read light mask in scenes. This command is not supported
for slave CLS-C6 devices.
Syntax: M SC [XX] LZMSK ?
XX= OFF, ON, 1...15 (Scenes)
Reply packet
M SC [XX] LZMSK [VALUE]
Scene Shade Mask Command
This command is used to remove or add shade group to scenes. This command is not
supported for slave CLS-C6 devices.
Syntax: M SC [XX] SZMSK [VALUE]
XX=OFF, ON, 1...15 (scene)
VALUE=0...63 (1=Add, 0=Remove)
(bit0...bit5=Shade group 1...Shade group6)
Scene Shade Status Command
This command is used to read shade group mask in scenes. Command is not
supported for slave ilux.
Syntax: M SC [XX] SZMSK ?
XX= OFF, ON, 1...15 (Scenes)
Reply packet
M SC [XX] SZMSK [VALUE]
Scene Name Query Command
The following command is used to query scene name:
Syntax: [ILUX] SC [XX] NAME ?
XX = OFF, ON, 1 - 15 Scenes
Reply packet
[ILUX] SC [XX] NAME [LABEL]
LABEL=Scene name
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 68
iLux Integrated Lighting System