Crestron iLux CLS-C6 Series Operation Manual page 82

Crestron CLS-C6/C6M & CLSI-C6/C6M
Operations Guide – DOC. 6347E
Function name Open Shades Momentary (All, Group 1-6)
Behavior Specified shades move toward the Open position for as long as the
button is pressed. Movement stops when button is released.
LED On while button is pressed
Applies To Remote Button
Rocker N/A
Behavior
Notes Shade commands with "All" parameter only affect all the shade groups
connected to the given CLS-C6 module. They do not pass from one
CLS-C6 module to the other (either when directly connected or when
linked through Cresnet system). To accomplish this function for all
shades in a multi-unit system, use SIMPL programming.
Function name Close Shades Momentary (All, Group 1-6)
Behavior Specified shades move toward the Closed position for as long as the
button is pressed. Movement stops when button is released.
LED On while button is pressed
Applies To Remote Button
Rocker N/A
Behavior
Notes Shade commands with "All" parameter only affect all the shade groups
connected to the given CLS-C6 module. They do not pass from one
CLS-C6 module to the other (either when directly connected or when
linked through Cresnet system). To accomplish this function for all
shades in a multi-unit system, use SIMPL programming.
Function name Jog Shades Open (All, Group 1-6)
Behavior Specified shades move toward the Open position for the specified jog
time, and then stop.
LED On while button is pressed
Applies To Remote Button
Rocker N/A
Behavior
Notes Jog time defaults to 0.05 sec. Other values can be set in iLux Designer.
Shade commands with "All" parameter only affects all the shade groups
connected to the given CLS-C6 module. They do not pass from one
CLS-C6 module to the other (either when directly connected or when
linked through Cresnet system). To accomplish this function for all
shades in a multi-unit system, use SIMPL programming.
Function name Jog Shades Closed (All, Group 1-6)
Behavior Specified shades move toward the Closed position for the specified jog
time, and then stop.
LED On while button is pressed
Applies To Remote Button
Rocker N/A
Behavior
Notes Jog time defaults to 0.05 sec. Other values can be set in iLux Designer.
Shade commands with "All" parameter only affects all the shade groups
connected to the given CLS-C6 module. They do not pass from one
CLS-C6 module to the other (either when directly connected or when
linked through Cresnet system). To accomplish this function for all
shades in a multi-unit system, use SIMPL programming.
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 78
iLux Integrated Lighting System