Crestron iLux CLS-C6 User Manual
Crestron integrated lighting system user guide cls-c6 series
Hide thumbs
Also See for iLux CLS-C6:
- Operation manual (92 pages) ,
- User manual (4 pages) ,
- Design manual (84 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Related Manuals for Crestron iLux CLS-C6
Summary of Contents for Crestron iLux CLS-C6
- Page 1 Crestron CLS-C6 Series iLux Integrated Lighting Systems ™ User Guide...
-
Page 2: Table Of Contents
Contents iLux Integrated Lighting Systems: CLS-C6 Series ™ Introduction...1 Operating Modes...5 Changing Scene Presets ...7 Problem Solving ...9 Standard Mode...5 Lights Mode...5 Shades Mode ...6 Troubleshooting...9 Further Inquiries ...9 All brand names, product names and trademarks are the property of their respective owners. -
Page 3: Ilux ™ Integrated Lighting Systems: Cls-C6 Series
Refer to the table on the next page for definition of available models. All models are available in three colors: white, black, or almond. For simplicity in this guide, references to the CLS-C6 unit apply equally to all, except where noted. - Page 4 Integrated Lighting Systems CLS-C6 Model Definition All controls and indicators for the CLS-C6 are located on the front of the unit. The front panel also contains a mini phone jack, under the flip-up cover, used for dealer programming functions, and an IR port for control via an optional IR remote control.
- Page 5 NOTE: Standard mode, Lights mode, and Shades mode mentioned in the following discussions are described in “Operating Modes” on page 5. CLS-C6 Controls & Indicators Descriptions (Continued on following page) User Guide - DOC. 6395B...
- Page 6 Integrated Lighting Systems CLS-C6 Controls & Indicators Descriptions (Continued) ON Button ^, v, Save, and Cancel Pushbuttons and LEDs Shades Pushbutton and LED Two-Digit Display ™ • iLux Integrated Lighting Systems: CLS-C6 Series CONTROLS & INDICATORS Up/Down Pushbutton Crestron CLS-C6 Series DESCRIPTION The ON button always recalls the On scene.
-
Page 7: Operating Modes
Crestron CLS-C6 Series Operating Modes After installation, the CLS-C6 operates in one of three modes: The following descriptions do not include additional functionality made possible by dealer programming. Those functions are beyond the scope of this guide. Standard Mode By default, the six function buttons recall scenes 1 - 6. As a scene is recalled, the lights fade (change from one level to another) in a specified time, and any shades in the scene go to their specified levels. -
Page 8: Shades Mode
Standard mode. ™ • iLux Integrated Lighting Systems: CLS-C6 Series • Press the right side of the function buttons to open the shades; press the left side to close the shades. Press the button while the shade is moving to stop •... -
Page 9: Changing Scene Presets
Crestron CLS-C6 Series Changing Scene Presets The CLS-C6 scene settings can be modified using the front panel controls, without having to use a PC. Changes to the lighting load levels and shade presets for one or more scenes can be accomplished as follows: User Guide - DOC. - Page 10 ™ • iLux Integrated Lighting Systems: CLS-C6 Series 12. To adjust the fade time, press the ^ and v buttons. When going up, the value will go from 0 seconds to 59 seconds, and then 1 minute to 99 minutes.
-
Page 11: Problem Solving
The unit does not Incorrect procedures were respond as used to change the expected after preset. changing preset. ™ iLux Integrated Lighting Systems: CLS-C6 Series CORRECTIVE ACTION Refer to “Changing Scene Presets” on page 7 to revise the preset correctly. • 9... - Page 12 Crestron Electronics, Inc. User Guide - DOC. 6395B 15 Volvo Drive Rockleigh, NJ 07647 (2014521) Tel: 888.CRESTRON 06.08 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.