Crestron iLux CLS-C6 Series Operation Manual page 51

Crestron CLS-C6/C6M & CLSI-C6/C6M
Operations Guide – DOC. 6347E
Joins
Digital Command Joins
External functions and their feedbacks are only supported by the iLux master. The
slave iLux(s) do not support external functions.
Programmable Joins 1-20 and partition joins and their feedback are only supported
for the master iLux.
Digital Command Joins (from Touch Screen to CLS-C6)
JOIN
1-20 Programmable via iLux Designer (no feedback)
100/101/102-116 Recall for Off Scene/On Scene/ Scene 1-15
133/134-148 Turn off loads in On Scene/ Scene 1-15
198/199-213 Toggle On Scene/Scene 1-15
232-243 Raise/Lower load 1-6 (z1 up, z1 dn, z2 up...)
244 Shade group 1 full open
245 Shade group 1 full close
246 Shade group 1 full stop
247 Shade group 1 open momentary
248 Shade group 1 close momentary
249 Shade group 1 open jog
250 Shade group 1 close jog
251 Shade group 1 full open /momentary open
252 Shade group 1 full close /momentary close
253 Shade group 1 full open/stop/close/stop
254-263 Shade group 2 control
264-273 Shade group 3 control
274-283 Shade group 4 control
284-293 Shade group 5 control
294-303 Shade group 6 control
304 Last Scene Master Raise
305 Last Scene Master Lower
306/307 All Lights Master Raise/Master Lower
308/309 On Scene Master Raise/Master Lower
310/311...338/339 Scene 1 Raise/Lower ... Scene 15 Raise/Lower
Quick save current light levels to scene specified in analog
344
join 32 (no change to unaffected loads).
348/349 Program On Scene/Off Scene
350 Program scene by number
351 Save Edit Scene
352 Cancel Scene Programming
353-358 Remove load 1-6 from Edit Scene
359-364 Remove shade group 1-6 from Edit Scene
365 Lock Edit Scene
366 Unlock Edit Scene
(Continued on following page)
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 47
iLux Integrated Lighting System
DESCRIPTION