Crestron iLux CLS-C6 Series Operation Manual page 60

Crestron CLS-C6/C6M & CLSI-C6/C6M
PROJECTINFO
Description:
Use this command to display the project file name, the date and time it was compiled, version and
change flags. For example, this command would produce information similar to the following:
Help Menu(s): Device
Syntax: PROJECTINFO
Parameters: None
PUTCONFIG†
Description: Use this command to load the project file to the CLS-C6
Help Menu(s): File
Syntax: PUTCONFIG PROJECT
Parameters: PROJECT – The only valid parameter value
REBOOT
Description: Use this command to reboot the CLS-C6
Help Menu(s): Common
Syntax: REBOOT
Parameters: None
REPORTCRESNET
Description: Use this command to report devices on the local network
Help Menu(s): Common
Syntax: REPORTCRESNET <ID>
REPORTCRESNET ALL
Parameters: <03...FE> to identify a specific device
ALL – To show all devices on the network
RESTORE
Description: Use this command to set all project configuration and parameters to the factory default settings.
Help Menu(s): System
Syntax: RESTORE ALL
Parameters: ALL the only valid value for this parameter
SYSTEM*
Description: Use this command to load firmware to the CLS-C6.
Help Menu(s): File
Syntax: SYSTEM
Parameters: None
UPLOAD*
Description: Use this command to load firmware to the slave device on the local network.
Help Menu(s): File
Syntax: UPLOAD <ID> FIRMWARE
Parameters: <03...FE>
FIRMWARE – the only valid value for this parameter
Operations Guide – DOC. 6347E
Project file name
Date
Time
Config data version : 1.1
User data version
Change flags
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 56
iLux Integrated Lighting System
: Conference Room.ilx
: 9/9/05
: 3:13:21 PM
: 1.0
: 00000000