Programming With Simpl Windows - Crestron iLux CLS-C6 Series Operation Manual

Crestron CLS-C6/C6M & CLSI-C6/C6M
Configuration Manager
Operations Guide – DOC. 6347E

Programming with SIMPL Windows

NOTE: While SIMPL Windows can be used to program the CLS-C6, it is
recommended to use SystemBuilder for configuring a system.
NOTE: SIMPL Windows does not distinguish between the CLS-C6/C6M and
CLSI-C6/C6M devices. All report as CLS units.
SIMPL Windows is Crestron's premier software for programming Crestron control
systems. It is organized into two separate but equally important "Managers":
Configuration and Program.
Configuration Manager is the view where programmers "build" a Crestron control
system by selecting hardware from the Device Library.
1. To incorporate the CLS-C6 into the system, drag the CLS-C6 from the
Lighting folder of the Device Library and drop it in the System Views.
Locating the CLS-C6 in the Device Library
The system tree of the control system displays the device in the appropriate
slot with a default Net ID as shown in the following illustration.
C2Net Device, Slot 9
2. If additional CLS-C6 devices are to be added, repeat step 1 for each device.
Each CLS-C6 is assigned a different Net ID number as it is added.
3. If necessary, double click a device to open the "Device Settings" window
and change the Net ID, as shown in the following illustration.
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 29
iLux Integrated Lighting System