Crestron iLux CLS-C6 Series Operation Manual page 59

Crestron CLS-C6/C6M & CLSI-C6/C6M
GREENLEDLEVEL
Description: Use this command to display or set the green LED level on the CLS-C6. Refer to "LED Brightness" on
page 26 for details.
Help Menu(s): Device
Syntax:
GREENLEDLEVEL <0..100> set the green leds brightness to level <0..100>
GREENLEDLEVEL display the green leds brightness level <0..100>
Parameters: <0...000> - to set the green LED brightness level
None – to display the current green LED brightness
HELP
Description: Use this command to display a list of help categories.
Help Menu(s): Main, Common
Syntax:
HELP
HELP ALL
HELP [CATEGORY]
Parameters: ALL - to display a list of all commands
CATEGORY - to show a list of commands in that category
None - to display a list of all categories
INFO
Description:
Use this command to display additional device information. For example, this command would
produce information similar to the following:
Help Menu(s): Common, System
Syntax: INFO
Parameters: None
IR
Description: Use this command to display or enable/disable IR reception. Refer to "IR Reception" on page 25 for
details.
Help Menu(s): Device
Syntax:
IR <ENABLE...DISABLE>
Parameters: ENABLE to enable the IR receiver
DISABLE to disable the IR receiver
None to display the current state
MOTIONSENSORLEVEL
Description: Use this command to display and change the internal motion sensor sensitivity level.*
Help Menu(s): Device
Syntax: MOTIONSENSORLEVEL
Parameters: Higher values make the motion sensor less sensitive.
Default is 78; valid range is 0...255
Operations Guide – DOC. 6347E
- show list of commands in category
Application version : 1.01.02
Loader version
Config data version : 1.1
User data version
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 55
iLux Integrated Lighting System
: 1.16.00
: 1.0