Shade Group Commands - Crestron iLux CLS-C6 Series Operation Manual

Crestron CLS-C6/C6M & CLSI-C6/C6M
Shade Group Operation
Commands
Shade Group Programming
Commands
Operations Guide – DOC. 6347E

Shade Group Commands

Shade Group Position Command
The following command is used to set shade group position:
Syntax: [ILUX] SZ [X|ALL]
X = 1 - 6 Shade group
ALL = All Shade groups
LEVEL = 0 - 100
Shade Group Position Query Command
The following command is used to get shade group position. This command is not
supported for slave CLS-C6 controllers and is applicable for Somfy shades only:
Syntax: M SZ [X|ALL] POS
Reply packet
M SZ [X|ALL]
LEVELx = 0 - 100 for shade group 1 - 6
Shade Group Open, Close and Stop Command
The following command is used to open, close or stop shade group(s):
Syntax: [ILUX] SZ [X|ALL] [OPEN|CLOSE|STOP]
X = 1 - 6 Shade group
ALL = All shade groups
Shade Group Jog Open and Close Command
The following command is used to jog open or jog close the shade group(s):
Syntax: [ILUX] SZ [X|ALL] [JOPEN|JCLOSE]
X = 1 - 6 Shade group
ALL = All shade groups
Shade Group Open/Stop/Close/Stop Command
The following command is used to stop shade if running, open shade if last operation
was closing and close if last time operation was opening:
Syntax: [ILUX] SZ [X|ALL] [OSCS]
X = 1 - 6 Shade group
ALL = All shade groups
Shade Group Name Query Command
The following command is used to query shade group name:
Syntax: [ILUX] SZ [X|ALL] NAME ?
X=1...6 Shade group
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 65
iLux Integrated Lighting System
POS [LEVEL]
?
POS [LEVEL1] [....] [LEVEL6]