Crestron iLux CLS-C6 Series Operation Manual page 6

Crestron CLS-C6/C6M & CLSI-C6/C6M
Operations Guide – DOC. 6347E
Features and Functions
(Continued)
• Supports room combining of up to 36 partitions
• Supports integration with building management system
• Master air-gap relay | 230V AC version available
• Integrates with 2-Series control systems via Cresnet
• Energy saving ASHRAE 90.1/LEEDS compliant
• Available in almond, black, or white
Supports Daylight Harvesting
•
• RS-232 Interface via C2N-IO
Six Channel Dimming
The CLS-C6 features six channels of dimming for LED*, incandescent, magnetic
low-voltage, neon/cold cathode, and two-wire dimmable fluorescent loads. On/off
switching of many non-dimmable lighting loads is also possible. Each channel
handles up to 800 watts individually, with a total rating of 1920 watts at 120 VAC
for CLS-C6/C6M (2300 watts at 230 VAC for CLSI-C6/C6M). Larger loads and
additional load types can also be supported using Crestron CLS-EXP series
expansion modules.
Six Group Shade Control
Using Crestron's networked shade and drapery controllers, the CLS-C6RF enables
versatile control of a roomful of motorized window treatments, screens and lifts in
up to six shade groups.
Energy Management
Using Crestron Green Light
allow for the management of demand response for load shedding and room
occupancy sensing for maximum energy efficiency and cost savings.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of control
and customization to suit each unique room application. Large ON and OFF buttons
provide instant access to the "On" and "All Off" scenes, while the six main buttons
can be set up to recall additional scene presets, adjust shades, or perform a host of
other functions. The buttons' "rocker" action enables intuitive, tactile control for
adjusting lighting levels and shade positions. An additional "Up/Down" button is
configurable for a variety of functions, including use as a master lighting or shade
control, or as a "shift" button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade elegantly
to their new settings. The selected scene is indicated by a white LED beside each
button, and the customizable label strip allows each button to be clearly labeled
using Crestron Engraver software or standard 3/8" tape labels. Dimming levels and
shade positions are displayed graphically on 6 green LED bargraphs accessible
behind the flip-up front cover. Additional controls and a numeric display hidden
beneath the cover enable setup without requiring a PC. Enhanced customization is
provided via the PC programming port using iLux Designer software.
* For a list of compatible ballasts, visit www.crestron.com/lightingcompatibility.
iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M • 2
iLux Integrated Lighting System
®
technology the iLux line of integrated lighting systems
®