Emerson Control Techniques Epsilon Eb Series Reference Manual page 147

Epsilon Eb and EN Drives Reference Manual
Note
Generally, online setup is used when editing parameters in a drive. Offline setup editing
is usually only done when not connected to a drive.
Step 1: Establishing Communications with Drive
Now that the basic EN drive setup parameters are entered, it is time to establish
communications with the drive and download the configuration data. Before proceeding, be
sure to connect the serial communication cable between your PC and the drive.
The first step in establishing serial communications is to select the Com port and the baud rate
using the procedure below:
1. Clicking on the Options menu.
2. Select the "Preferences\Communications" option. The Modbus Setup dialog box will be
displayed.
3. Select the "Configure Serial Port" button. The Communications Setup dialog box below
will be displayed.
Figure 107: Communications Setup Dialog Box
4. Select the Com port you will be using on your PC and baud rate.
5. Click the OK button.
6. Click the OK button in the Modbus Setup dialog box.
Note
The default baud rate for all drives is 19200.
128
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com