Emerson Control Techniques Epsilon Eb Series Reference Manual page 100

This wail must have good
continuity to enclosure ground.
Through wall shield grommets
External Encoder
CMDS or CMMS Cable
CFOS
Cable
Motor
Figure 52: AC Filter and Cable Connections for EN Drives
External Encoder
CFOS Cable
Motor
Figure 53: AC Filter and Cable Connections for Epsilon Drives
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NEMA Enclosure
AC In
Bonded to mounting plate
and enclosure wall
3-phase
filter
CFOS
Cable
CMDS or CMMS Cable
Customer supplied
terminal strip
(Connect Shield Through)
CFCO Cable
NEMA Enclosure
This wall must have good
continuity to enclosure ground
AC In
Through wall shield grommets
Customer supplied
terminal strip
(Connect shield through)
CFCO Cable
CMDS Cable
Installation
Note:
EMC testing was done
with surface paint
removed from the
mounting panel area
for drive contact.
Drive
Note:
The CFCS cable can
be cut and connected
through a terminal strip
instead of using a CFOS
and a CFCO cable.
Bonded to mounting plate
and enclosure wall
Drive
1-phase
filter
Note: EMC testing was done
without surface paint
removed from the
mounting panel area for
drive contact.
81