Emerson Control Techniques Epsilon Eb Series Reference Manual page 12

Manufacturer's Name:
Manufacturer's Address:
Products Description:
Model Number:
System Options:
Electomagnetic Compatibility (EMC):
EN 55011/1991 Class A Group 1, CISPR 11/1990 Class A Group 1
EN 61800-3, 1996:
Supplementary information:
The products herewith comply with the requirements of the Low Voltage Directive (LVD) 73/23/EEC and EMC Directive
This electronic drive product is intended to be used with an appropriate motor, electrical protection components and other
equipment to form a complete end product or system. It must only be installed by a professional assembler who is familiar
with requirements for safety and electromagnetic compatibility ("EMC"). The assembler is responsible for ensuring that
the end product or system complies with all the relevant laws in the country where it is to be used. Refer to the product
Bradley Schwartz/ VP Engineering
European Contact:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Declaration of Conformity
Control Techniques
12005 Technology Drive
Eden Prairie, MN 55344
Declares that the following products:
Epsilon Series Digital Servo Drive
Eb-202, Ei-202, Eb-203, Ei-203, Eb-205 and Ei-205
This declaration covers the above products with the ECI-44 Screw
Terminal Interface.
Conforms to the following product specification:
IEC 1000-4-2/1995; EN 61000-4-2, 6kV CD
IEC 1000-4-3/1995; EN 61000-4-3, ENV 50140/1993, 80% AM, 10V/m
@ 3 m
IEC 1000-4-4/1995; EN 61000-4-4, 2 kV ALL LINES
EN 61000-4-5, 1kV L-L, 2kV L-G
EN 61000-4-11, 300 ms/1000 ms 100% DIP
ENV 50204/1995, Pulse, 900 MHz, 50% DTY, 200 Hz
89/336/EEC
manual for installation guidelines.
September 28, 1999
Sobetra Automation
Langeveldpark Lot 10
P. Dasterleusstraat 2
1600 St. Pieters Leeuw, Belgium
USA
Date
ix