The Telnet Screen; Figure 306 Advanced > Remote Mgmt > Ssh; Table 150 Advanced > Remote Mgmt > Ssh - ZyXEL Communications 5 Series User Manual

Chapter 27 Remote Management Screens
It is recommended that you disable Telnet and FTP when you configure SSH
for secure connections.
Figure 306 ADVANCED > REMOTE MGMT > SSH
The following table describes the labels in this screen.
Table 150 ADVANCED > REMOTE MGMT > SSH
LABEL
Server Host Key
Server Port
Server Access
Secure Client IP
Address
Apply
Reset

27.7 The Telnet Screen

You can use Telnet to access the ZyWALL's SMT or command line interface. Specify which
interfaces allow Telnet access and from which IP address the access can come.
Click ADVANCED > REMOTE MGMT > TELNET to open the following screen. Use this
screen to specify which interfaces allow Telnet access and from which IP address the access
can come.
508
DESCRIPTION
Select the certificate whose corresponding private key is to be used to identify the
ZyWALL for SSH connections. You must have certificates already configured in the
My Certificates screen (Click My Certificates and see
details).
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using
this service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 20 on page 399
ZyWALL 5/35/70 Series User's Guide
for