The Www Screen; Configuring The Www Screen; The Telnet Screen - ZyXEL Communications AMG1302-T10A User Manual

17.2 The WWW Screen

Use this screen to specify how to connect to the Device from a web browser, such as Internet
Explorer.

17.2.1 Configuring the WWW Screen

Click Advanced > Remote MGMT to display the WWW screen.
Figure 101 Advanced > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 69 Advanced > Remote Management > WWW
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

17.3 The Telnet Screen

You can use Telnet to access the Device's command line interface. Specify which interfaces allow
Telnet access and from which IP address the access can come.
AMG1302-T10A User's Guide
DESCRIPTION
You may change the server port number for a service, if needed. However, you must use
the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Device using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the Device
using this service.
Select All to allow any computer to access the Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 17 Remote Management
181