Traffic Redirect; Figure 393 Menu 6.2: Traffic Redirect; Table 230 Menu 6.1: Route Assessment; Table 231 Menu 6.2: Traffic Redirect - ZyXEL Communications 5 Series User Manual

Chapter 40 Route Setup
The following table describes the fields in this menu.

Table 230 Menu 6.1: Route Assessment

FIELD
Probing WAN 1/2
Check Point
Probing Traffic
Redirection Check
Point
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

40.3 Traffic Redirect

To configure the parameters for traffic redirect, enter 2 in Menu 6 - Route Setup to open
Menu 6.2 - Traffic Redirect as shown next.

Figure 393 Menu 6.2: Traffic Redirect

The following table describes the fields in this menu.

Table 231 Menu 6.2: Traffic Redirect

FIELD
Active
Backup Gateway IP
Address
Metric
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
650
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your
ZyWALL's WAN accessibility.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the ZyWALL will use
the default gateway IP address.
Press [SPACE BAR] and then press [ENTER] to choose Yes to test your
ZyWALL's traffic redirect connection.
If you do not select No in the Use Default Gateway as Check Point field and
enter a domain name or IP address of a reliable nearby computer (for example,
your ISP's DNS server address) in the Check Point field, the ZyWALL will use
the default gateway IP address.
Menu 6.2 - Traffic Redirect
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 14
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic
redirect setup. The default is No.
Enter the IP address of your backup gateway in dotted decimal notation.
The ZyWALL automatically forwards traffic to this IP address if the ZyWALL's
Internet connection terminates.
This field sets this route's priority among the routes the ZyWALL uses.
Enter a number from 1 to 15 to set this route's priority among the ZyWALL's
routes (see Section on page
the route has.
171) The smaller the number, the higher priority
ZyWALL 5/35/70 Series User's Guide