Content Filter Policy: External Database; Figure 191 Security > Content Filter > Policy > External Database - ZyXEL Communications 5 Series User Manual

Chapter 17 Content Filtering Screens
Table 94 SECURITY > CONTENT FILTER > Policy > General (continued)
LABEL
Start IP Address
End IP Address
Subnet Mask
Add
Modify
Delete
Apply
Cancel

17.5 Content Filter Policy: External Database

Click SECURITY > CONTENT FILTER > Policy and then a policy's external database
icon to display the following screen.
Use this screen to edit which content categories the content filter policy blocks.
Figure 191 SECURITY > CONTENT FILTER > Policy > External Database
334
DESCRIPTION
Enter the single IP address or the starting IP address in a range here.
Enter the ending IP address in a range here.
Enter the subnet mask here, if applicable.
Click Add to add a new address to the Configured Address box. You
can add multiple addresses, ranges of addresses, and/or subnets.
To edit an existing source or destination address, select it from the box
and click Modify.
Highlight an existing source or destination address from the
Configured Address box and click Delete to remove it.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving.
ZyWALL 5/35/70 Series User's Guide