Restore Configuration; Figure 464 System Maintenance: Backup Configuration; Figure 465 System Maintenance: Starting Xmodem Download Screen; Figure 466 Backup Configuration Example - ZyXEL Communications 5 Series User Manual

Chapter 49 Firmware and Configuration File Maintenance

Figure 464 System Maintenance: Backup Configuration

2 The following screen indicates that the Xmodem download has started.

Figure 465 System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in
the following screen.

Figure 466 Backup Configuration Example

Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.
4 After a successful backup you will see the following screen. Press any key to return to
the SMT menu.

Figure 467 Successful Backup Confirmation Screen

49.4 Restore Configuration

This section shows you how to restore a previously saved configuration. Note that this
function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
730
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any
time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###
ZyWALL 5/35/70 Series User's Guide