Configuring The Pptp Client - ZyXEL Communications 5 Series User Manual

Table 227 Menu 4: Internet Access Setup (Ethernet) (continued)
FIELD
Gateway IP
Address
Network
Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

38.3 Configuring the PPTP Client

The ZyWALL supports only one PPTP server connection at any given time.
To configure a PPTP client, you must configure the My Login and Password fields for a PPP
connection and the PPTP parameters for a PPTP connection.
After configuring My Login and Password for PPP connection, press [SPACE BAR] and
then [ENTER] in the Encapsulation field in Menu 4 -Internet Access Setup to choose
PPTP as your encapsulation option. This brings up the following screen.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Enter the gateway IP address associated with your static IP.
Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network (for example a private IP address used in a local
network) to a different IP address known within another network (for example a
public IP address used on the Internet).
Choose None to disable NAT.
Choose SUA Only if you have a single public IP address. SUA (Single User
Account) is a subset of NAT that supports two types of mapping: Many-to-One and
Server.
Choose Full Feature if you have multiple public IP addresses. Full Feature
mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-Many
Overload, Many- One-to-One and Server. When you select Full Feature you must
configure at least one address mapping set!
Please see Chapter 22 on page 435
Address Translation feature.
Chapter 38 Internet Access
for a more detailed discussion on the Network
641