Table 174 System Error Logs; Table 175 Access Control Logs - ZyXEL Communications 5 Series User Manual

Table 173 System Maintenance Logs (continued)
LOG MESSAGE
%s
Remote node is connecting.
Remote node is dropping

Table 174 System Error Logs

LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN%d connection is up
WAN connection is down.
Dial Backup starts
Dial Backup ends
DHCP Server cannot assign
the static IP %S (out of
range).
The DHCP static IP %s is
conflict.
SMTP fail (%s)
SMTP authentication fail
(%s)
%s

Table 175 Access Control Logs

LOG MESSAGE
Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF ]
<Packet Direction>
Firewall rule [NOT] match:[ TCP
| UDP | IGMP | ESP | GRE | OSPF
] <Packet Direction>, <rule:%d>
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
The myZyXEL.com service registration failed due to the error
listed. If you are unable to register for services at
myZYXEL.com, the error message displayed in this log may
be useful when contacting customer support.
A remote user is connecting using PPP. Other PPP
connection requests must wait until this process is complete.
A remote user is releasing a PPP connection. Other PPP
connection requests must wait until this process is complete.
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
The router failed to allocate memory for the NetBIOS filter
settings.
The router failed to allocate memory for the NetBIOS filter
settings.
The specified WAN connection is up.
A WAN connection is down. You cannot access the network
through this interface.
Dial backup started working.
Dial backup stopped working.
The LAN subnet, LAN alias 1, or LAN alias 2 was changed and
the specified static DHCP IP addresses are no longer valid.
The static DHCP IP address conflicts with another host.
The device failed to send an e-mail (error message included).
The device failed to authenticate with the SMTP server (error
message included).
The device will send a Gratuitous ARP to detect the IP collision. If
the collision happens, there will be a log in centralized log
DESCRIPTION
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or forwarded
according to the default policy's setting.
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule.
Chapter 32 Logs Screens
563