Figure 342 Maintenance > Time And Date; Table 200 Maintenance > Time And Date - ZyXEL Communications 5 Series User Manual

Chapter 33 Maintenance Screens
When the ZyWALL uses the NTP time server pools, it randomly selects one pool and tries to
synchronize with a server in it. If the synchronization fails, then the ZyWALL goes through
the rest of the list in order from the first one tried until either it is successful or all the pre-
defined NTP time server pools have been tried.
Resetting the Time
The ZyWALL resets the time in the following instances:
• When you click
• On saving your changes.
• When the ZyWALL starts up.
• 24-hour intervals after starting.
To change your ZyWALL's time and date, click MAINTENANCE > Time and Date. The
screen appears as shown. Use this screen to configure the ZyWALL's time based on your local
time zone.
Figure 342 MAINTENANCE > Time and Date
The following table describes the labels in this screen.
Table 200 MAINTENANCE > Time and Date
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
588
.
Synchronize Now
DESCRIPTION
This field displays the ZyWALL's present time.
This field displays the ZyWALL's present date.
ZyWALL 5/35/70 Series User's Guide