Figure 24 Isp Parameters: Pppoe Encapsulation - ZyXEL Communications 5 Series User Manual

Table 13 ISP Parameters: Ethernet Encapsulation
LABEL
IP Address
Assignment
My WAN IP
Address
My WAN IP
Subnet Mask
Gateway IP
Address
First DNS Server
Second DNS
Server
Back
Apply
4.2.1.2 PPPoE Encapsulation
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) standard specifying how a host personal computer
interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access
to high-speed data networks.

Figure 24 ISP Parameters: PPPoE Encapsulation

ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the IP subnet mask in this field.
Enter the gateway IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
Click Back to return to the previous wizard screen.
Click Apply to save your changes and go to the next screen.
Chapter 4 Wizard Setup
89