Figure 185 Security > Anti-Spam > Lists; Table 90 Security > Anti-Spam > Lists - ZyXEL Communications 5 Series User Manual

Figure 185 SECURITY > ANTI-SPAM > Lists
The following table describes the labels in this screen.
Table 90 SECURITY > ANTI-SPAM > Lists
LABEL
Resource Usage
Whitelist & Blacklist
Storage Space in
Use
Whitelist
Use Whitelist
Active
Type
Content
Modify
Insert
Blacklist
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This bar displays the percentage of the ZyWALL's anti-spam whitelist and
blacklist storage space that is currently in use. The bar turns from green to red
when the maximum is being approached. When the bar is red, you should
consider deleting unnecessary entries before adding more.
Select this check box to have the ZyWALL forward e-mail that matches a
whitelist entry without doing any more anti-spam checking on that individual e-
mail.
This field shows whether or not an entry is turned on.
This field displays whether the entry is based on the e-mail's source IP address,
source e-mail address, an MIME header or the e-mail's subject.
This field displays the source IP address, source e-mail address, MIME header
or subject content for which the entry checks.
Click the edit icon to change the entry. Click the remove icon to delete the entry.
Click the move icon to change the entry's position in the list.
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Chapter 16 Anti-Spam Screens
321