Bandwidth Monitor; Figure 21 Home > Bandwidth Monitor; Table 12 Advanced > Bw Mgmt > Monitor - ZyXEL Communications 5 Series User Manual

Chapter 3 Introducing the Web Configurator
Table 11 HOME > VPN Status
LABEL
IPSec Algorithm
Automatic
Refresh Interval
Refresh

3.4.10 Bandwidth Monitor

Click Bandwidth in the HOME screen to display the bandwidth monitor. This screen displays
the device's bandwidth usage and allotments.
Figure 21 Home > Bandwidth Monitor
The following table describes the labels in this screen.
Table 12 ADVANCED > BW MGMT > Monitor
LABEL
Interface
Class
Budget (kbps)
Current Usage (kbps)
84
DESCRIPTION
This field displays the security protocols used for an SA.
Both AH and ESP increase ZyWALL processing requirements and communications
latency (delay).
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update the
screen statistics.
Click this button to update the screen's statistics immediately.
DESCRIPTION
Select an interface from the drop-down list box to view the bandwidth usage
of its bandwidth classes.
This field displays the name of the bandwidth class.
A Default Class automatically displays for all the bandwidth in the Root
Class that is not allocated to bandwidth classes. If you do not enable
maximize bandwidth usage on an interface, the ZyWALL uses the bandwidth
in this default class to send traffic that does not match any of the bandwidth
A
classes.
This field displays the amount of bandwidth allocated to the bandwidth class.
This field displays the amount of bandwidth that each bandwidth class is
using.
ZyWALL 5/35/70 Series User's Guide