Table 241 Sua Address Mapping Rules - ZyXEL Communications 5 Series User Manual

Menu 15.1.255 is read-only.

Table 241 SUA Address Mapping Rules

FIELD
Set Name
Idx
Local Start IP
Local End IP
Global Start
IP
Global End IP This is the ending global IP address (IGA).
Type
Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER
to Confirm..." to save your configuration, or press [ESC] to cancel.
44.2.1.2 User-Defined Address Mapping Sets
Now look at option 1 in menu 15.1. Enter 1 to bring up this menu. Look at the differences
from the previous menu. Note the extra Action and Select Rule fields mean you can configure
rules in this screen. Note also that the [?] in the Set Name field means that this is a required
field and you must enter a name for the set.
The entire set will be deleted if you leave the Set Name field blank and press
[ENTER] at the bottom of the screen.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This is the name of the set you selected in menu 15.1 or enter the name of a new set
you want to create.
This is the index or rule number.
Local Start IP is the starting local IP address (ILA).
Local End IP is the ending local IP address (ILA). If the rule is for all local IPs, then the
start IP is 0.0.0.0 and the end IP is 255.255.255.255.
This is the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as
the Global Start IP.
These are the mapping types discussed above. Server allows us to specify multiple
servers of different types behind NAT to this machine. See later for some examples.
Chapter 44 Network Address Translation (NAT)
677