Log Description Example; Figure 336 Logs > View Log; Table 170 Logs > View Log - ZyXEL Communications 5 Series User Manual

Chapter 32 Logs Screens
Figure 336 LOGS > View Log
The following table describes the labels in this screen.
Table 170 LOGS > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Message
Source
Destination
Note

32.2.1 Log Description Example

The following is an example of how a log displays in the command line interpreter and a
description of the sample log. Refer to
and the CLI Reference Guide for details on using the command line interpreter to display logs.
# .time
notes
message
556
DESCRIPTION
The categories that you select in the Log Settings page (see
558) display in the drop-down list box.
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Click Email Log Now to send the log screen to the e-mail address specified in the
Log Settings page (make sure that you have first filled in the E-mail Log Settings
fields in Log Settings, see
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
The logs display in the table. Click a column's heading to sort the log entries by that
criteria.
This field displays the log number.
This field displays the time the log was recorded. See
configure the ZyWALL's time and date.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
Section on page 561
source
Section 32.3 on page 558).
Section 33.4 on page 587
for more log message descriptions
destination
ZyWALL 5/35/70 Series User's Guide
Section 32.3 on page
to