ZyXEL Communications 5 Series User Manual page 70

Chapter 3 Introducing the Web Configurator
Table 4 Web Configurator HOME Screen in Router Mode (continued)
LABEL
Disable budget
control
Apply
Enter modem
unlock code
Apply
Remaining Time
Budget
Remaining Data
Budget
Reset time and
data budget
counters
Latest Alerts
Date/Time
Message
System Status
Port Statistics
DHCP Table
VPN
Bandwidth
70
DESCRIPTION
This field displays if you have enabled budget control but insert a 3G card with a
different user account from the one for which you configured budget control.
Select this option to disable budget control.
If you want to enable and configure new budget control settings for the new user
account, go to the 3G (WAN 2) screen.
The ZyWALL keeps the existing statistics if you do not change the budget control
settings. You could reinsert the original card and enable budget control to have
the ZyWALL continue counting the budget control statistics.
Click Apply to save your changes in this section.
This field only displays when you insert a 3G card and the internal modem on the
3G card is blocked.
Enter a key to enable the internal modem on your 3G card. By default, the key is
the last four digits of your phone number used to dial up the 3G connection.
Otherwise, you need to get the key from your service provider.
Click Apply to save your changes in this section.
This displays when you enable budget control in the 3G (WAN 2) screen.
This shows the amount of time the 3G connection can still be used before the
ZyWALL takes the actions you specified in the 3G (WAN 2) screen.
This displays when you enable budget control in the 3G (WAN 2) screen.
This shows how much data (in bytes) can still be transmitted through the 3G
connection before the ZyWALL takes the actions you specified in the 3G (WAN 2)
screen.
Note: The budget counters will not be reset when you restore the
factory defaults. The budget counters are saved to the flash
every hour or when the 3G connection is dropped. If you
restart the ZyWALL within one hour, any change in the
counters will not be saved.
This displays when you enable budget control in the Network > WAN > 3G (WAN
2) screen.
Click this button to reset the time and data budgets immediately. The count starts
over with the 3G connection's full configured monthly time and data budgets. This
does not affect the normal monthly budget restart.
This table displays the five most recent alerts recorded by the ZyWALL. You can
see more information in the View Log screen, such as the source and destination
IP addresses and port numbers of the incoming packets.
This is the date and time the alert was recorded.
This is the reason for the alert.
Click Port Statistics to see router performance statistics such as the number of
packets sent and number of packets received for each port.
Click DHCP Table to show current DHCP client information.
Click VPN to display the active VPN connections.
Click Bandwidth to view the ZyWALL's bandwidth usage and allotments.
ZyWALL 5/35/70 Series User's Guide